Switch#conf terminal
Switch# masukan Vanilla
Switch#wr memory (save vanilla)
Building configuration
Switch(config)#boot sy
Switch(config)#boot system flas
Switch(config)#boot system flash:c2960x-universalk9-mz.152-7.E2.bin
Switch(config)#exit
Switch#
switch#
Switch#copy tftp flash
Address or name of remote host [192.168.1.2]?
Source filename [c2960x-universalk9-mz.152-7.E2]? c2960x-universalk9-mz.152-7.E2.bin
Destination filename [c2960x-universalk9-mz.152-7.E2.bin]? c2960x-universalk9-mz.152-7.E2.bin
Accessing tftp://192.168.1.2/c2960x-universalk9-mz.152-7.E2.bin...
Loading c2960x-universalk9-mz.152-7.E2.bin from 192.168.1.2 (via Vlan1): !!!
Switch#dir flash:
witch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#boot sys flash:c2960x-universalk9-mz.152-7.E2.bin
Switch(config)#exit
Switch#sh ru
Switch#sh running-config
Building configuration...
Switch#conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#
Jan 29 03:36:39.151: %PNP-6-PNP_SAVING_TECH_SUMMARY: Saving PnP tech summary (pnp-tech-discovery-summary)... Please wait. Do not interrupt.
Switch(config)#int vlan1
Switch(config-if)#ip add 192.168.1.3 255.255.255.0
Switch(config-if)#no sh
Switch(config-if)#no shutdown